- LEADING
- TRAILING
- MULTIPUPOSE CONT.
- HF BALLAST.CONT
- RELAY CONT.
- LED CONT
 |
230V ±14% 50/60Hz single phase & neutral supply at 16A 8 x dimmed outputs (leading edge phase control) at 2A. Maximum device load 16A. |
 |
DLE120-S - 1 x 20A Leading Edge Dimmer
230V ±14% 50/60Hz Single Phase at 20A 1 dimmed output at 20A No sub circuit protection - feed from 20A MCB Rise Time >200µS @230V 8 x 0-5V/0-10V/dry contact multi-function programmable inputs |
 |
DLE220-S - 2 x 20A Leading Edge Dimmer
230V ±14% 50/60Hz Single Phase at 40A2 dimmed outputs at 20A Each output protected by a 20A MCB, Robust SCR module regulating device Rise Time >100μS at 230V, 1 x RS485 DyNet/DMX512 serial port |
 |
DLE405 - 4 x 5A Leading Edge Dimmer
230V ±14% 50/60Hz Single Phase at 20A 4 dimmed outputs at 5A Each output protected by a 6A MCB Rise time >200µS @230V |
 |
DLE410 - 4 x 10A Leading Edge Dimmer
230V ±14% 50/60Hz Single Phase at 40A 4 dimmed outputs at 10A , Each output protected by a 10A MCB Robust SCR module regulating device Rise time >200µS @230V Option DLE410-A Dual Port DMX512 & DyNet |
 |
DLE1203 - 12 x 3A Leading Edge Dimmer
230V ±14% 50/60Hz Single Phase at 32A 12 dimmed outputs at 3A. Total device load 32A 2 blocks of 6 channels, each protected by a 16A MCB Rise time >100µS @230V |
 |
DLE1205 - 12 x 5A Leading Edge Dimmer
230/400V ±14% 50/60Hz Single Phase at 60A or 3-Phase Y at 20A per phase 12 dimmed outputs at 5A. Total device load 60A Each output protected by a 6A MCB Rise time >100µS @230V 1 x RS485 serial port - DyNet & DMX512 |
 |
DLE1210 - 12 x 10A Leading Edge Dimmer
230V ±14% 50/60Hz 3-Phase Y at 40A per phase 12 dimmed outputs (leading edge phase control) at 10A. Total device load 120A max Each output protected by a 10A MCB Rise time > 200µS @ 230V , RS485 serial port - DyNet & DMX512 |
 |
DLE1210GL - 12 x 10A Leading Edge Dimmer
230V ±14% 50/60Hz Single Phase at 75A or 3-Phase Y at 25A per phase12 dimmed outputs (leading edge phase control) at 10A. Total device load 75A max. , Each output protected by a 10A MCB Rise time > 100µS @ 230V RS485 serial port - DyNet & DMX512, 1 x programmable dry contact AUX input |
 |
DLE1220GL-S - 12 x 20A Leading Edge Dimmer
230V ±14% 50/60Hz 3-Phase Y at 63A per phase 12 dimmed outputs (leading edge phase control) at 20A. Total device load 180A max, Each output protected by a 20A MCB Robust SCR module regulating device , Rise time > 200µS @ 230V RS485 serial port - DyNet & DMX512 |
 |
230V ±14% 50/60Hz Single Phase at 30A or 3-Phase Y 10A per phase 3 dimmed outputs (trailing edge phase control) at 10A. Total device load 30A, Each output protected by a 10A MCB Regulating device - IGBT 1200V, 57A nom., 200A surge 8 multipurpose programmable dry contact 0-5V/0-10V DC analogue inputs |
 |
DTE1210 - 12 x 10A Trailing Edge Dimmer
230V ±14% 50/60Hz 3-Phase Y at 120A 12 dimmed outputs (trailing edge phase control) at 10A. Total device load 120A Each output protected by a 10A MCB Regulating device - Dual MOSFET's 600V, 47A nom., 141A surge |
 |
230V ±14% 50/60Hz Single Phase at 16A 8 x outputs at 2A, dimmed, switched or HF Ballast (module dependent) DIN Rail enclosure (12 unit) Will accept 8 x output modules, which are plug in for ease of service |
 |
DDBC400 - Multipurpose Controller
230V ±14% 50/60Hz Single Phase at 5A 4 x outputs at 1A, dimmed or switched (module dependant) + 4 x outputs DSI/1-10V Ballast control (fixed module) DIN Rail enclosure (12 unit) Will accept 1 x output modules, which is plug in for ease of service |
 |
DMC805 - Multipurpose Controller
230V ±14% 50/60Hz Single Phase at 40A , 4 dimmed outputs at 5A Dimmed channel rise time >200uS @ 230V 4 switched outputs at 10A (total switched output load 20A) Each block of 4 channels protected by a 20A MCB 4 x control outputs, each selectable to 1-10V or DSI |
 |
230V ±14% 50/60Hz Single Phase at 10A 1 x relay output at 10A (inductive) 1 x output selectable to: DALI Broadcast, 1-10V, DSI DALI Ballasts and transformers: 5, 0-10V: 10mA source or 20mA sink DSI Ballasts and transformers: 15, 1 x RS485 serial port - DyNet & DMX512 |
 |
DDBC100-DALI - DALI HF Ballast Controller 1 x DALI control output, supporting a full DALI universe of 64 channels, including backward channel |
 |
DDBC300-DALI - DALI HF Ballast Controller
230V ±14% 50/60Hz Single Phase at 0.1A 3 DALI control outputs, each supporting a full DALI universe of 64 channels (192 total), including backward channel 1 x RS485 serial port - DyNet & DMX512 |
 |
DDBC320-DALI - DALI HF Ballast Controller
230V ±14% 50/60Hz Single Phase at 0.1A 3 DALI control outputs, each supporting a full DALI universe of 64 channels (192 total), including backward channel 3 x 20A feed through switched circuits for DALI ballast mains supply 1 x RS485 serial port - DyNet & DMX512 |
|
DDBC400 - Multipurpose Controller
230V ±14% 50/60Hz Single Phase at 5A 4 x outputs at 1A, dimmed or switched (module dependant) + 4 x outputs DSI/1-10V Ballast control (fixed module) DIN Rail enclosure (12 unit) Will accept 1 x output modules, which is plug in for ease of service |
|
DDMC802 - Multipurpose Controller 8 x outputs at 2A, dimmed, switched or HF Ballast (module dependent) DIN Rail enclosure (12 unit) Will accept 8 x output modules, which are plug in for ease of service |
 |
DDBC1200 - HF Ballast Controller 12 control outputs, selectable to DALI (Broadcast mode only), 0-10V or DSI Output capacity - DALI mode: 80 DALI ballasts per channel, 500 total, 0-10V mode: 100mA sink, 50mA source per channel, DSI: 100 DSI ballasts per channel, 1200 total |
 |
DBC410 - 1-10V & DSI HF Ballast Controller 4 switched outputs at 10A Each output protected by a 10A MCB 4 x HF ballast control outputs, each selectable to 1-10V or DSI Programmable Logic Controller |
 |
DBC1205 - 1-10V & DSI HF Ballast Controller
230V ±14% 50/60Hz Single Phase at 60A or 3-Phase Y at 20A per phase 12 switched outputs at 5A 12 x HF ballast control outputs, each selectable to 1-10V or DSI Maximum total load 60A 3 blocks of 4 channels, each protected by a 20A MCB |
 |
DBC1210 - DALI, DSI & 1-10V HF Ballast Controller 12 switched outputs at 10A 12 x HF ballast control outputs, each selectable to 1-10V, DALI (Broadcast mode) or DSI Maximum total load 120A |
 |
DBC1220GL - DALI, DSI & 1-10V & HF Ballast Controller
400/230V ±14% 50/60Hz 3-Phase Y at 63A 12 switched outputs at 20A Maximum total load 180A 12 x HF ballast control outputs, each selectable to 1-10V, DALI (Broadcast mode) or DSI |
 |
230V ±14% 50/60Hz Single Phase at 20A 2 x switched output at 10A (inductive) 1 x RS485 serial port - DyNet & DMX512 |
 |
DDRC420FR - 4 x 20A Relay Controller
100-240V 50/60Hz Single Phase at 0.1A 4 x switched feed thru outputs at 20A (inductive). Override switch and status indicator for each channel 1 x RS485 serial port - DyNet & DMX512 1 x programmable dry contact AUX input |
 |
DDRC810 - 8 x 10A Relay Controller
230V ±14% 50/60Hz Single Phase at 20A 8 x switched outputs at 10A (max total box load is 20A) DIN Rail enclosure (12 unit) Programmable Logic Controller (8 Tasks |
 |
DDRC810DT - 8 x 10A Relay Controller
230V ±14% 50/60Hz Single Phase at 0.1A 8 x switched outputs at 10A (max total box load is 40A) Relay outputs are dry contact single pole double throw (SPDT) DIN Rail enclosure (12 unit) Programmable Logic (8 Tasks) |
 |
DDRC820FR - 8 x 20A Relay Controller
100-240V ±14% 50/60Hz Single Phase at 0.1A 8 x switched feed thru outputs at 20A (inductive). Maximum device load 160A 1 x RS485 serial port - DyNet & DMX512 1 x programmable dry contact AUX input |
 |
DDRC1220FR-GL - 12 x 20A Relay Controller
100-240 V 50/60Hz Single Phase at 0.1A12 x switched feed thru outputs at 20A (inductive). Maximum device load 180A 1 x RS485 serial port - DyNet & DMX512 1 x programmable dry contact AUX input |
 |
DRC810DT - 8 x 10A Relay Controller
230V ±14% 50/60Hz Single Phase at 0.1A 8 x switched outputs at 10A Relay outputs are dry contact single pole double throw (SPDT) 8 x 0-5V/0-10V/dry contact multi-function programmable inputs Programmable logic controller (8 tasks) |
 |
DRC1205 - 12 x 5A Relay Controller
230V ±14% 50/60Hz Single Phase at 60A or 3-Phase Y at 20A per phase 12 switched outputs at 5A Maximum total load 60A 3 blocks of 4 channels, each protected by a 20A MCB Programmable Logic Controller |
 |
DRC1210 - 12 x 10A Relay Controller
400/230V ±14% 50/60Hz Single Phase at 40A 12 switched outputs at 10A , Maximum total load 120A Each output protected by a 10A MCB 1 x RS485 DyNet serial port 1 x programmable dry contact AUX input |
 |
DRC1220GL - 12 x 20A Relay Controller
400/230V ±14% 50/60Hz 3-Phase Y at 80A per phase12 switched outputs at 20A , Maximum total load 180A Each output protected by a 20A MCB 1 x RS485 DyNet serial port 1 x programmable dry contact AUX input |
 |
230V ±14% 50/60Hz Single Phase at 130 watts 4 x 1A regulated constant voltage pulse width modulated outputs Outputs selectable to 12V/24V/Common Anode/Common Cathode 1 x RS485 serial port - DyNet & DMX512 |
 |
DDLEDC605 - LED Controller
External 20A regulated power supply, enabling a range of nominal output voltages Controller supply voltage range selectable with internal link to 18-32V DC (standard) or 12-15VDC. 1 x RS485 DyNet and DMX512 serial port 6 x 5A regulated pulse-width modulated common voltage mode outputs |
 |
DDLEDC60035 - LED Controller
Regulated 18-32V DC 2.5A supply 6 x 350mA Regulated pulse width modulated current mode outputs Minimum internal voltage drop 200mV 1 x RS485 serial port - DyNet and DMX512 |
 |
DLEDC48 - Multipurpose Controller
230V ±14% 50/60Hz Single Phase at 0.2A48 (16 x RGB) controlled outputs at DC 50mA max Regulated pulse width modulated current regulated (current mode) outputs RJ12 socket load connection, 3 channels per socket 1 x RS485 serial port - DyNet and DMX512 |
