- CLAMPS
- STANDS
- EQUIPMENT
- ELECTRIC
- SCENERY
![]() |
The Twenty Clamp® is the latest addition to our range of aluminium clamps. Manufactured with pressure die cast aluminium, the Twenty Clamp® has been designed to eliminate truss damage usually associated with steel hook clamps. |
![]() |
Supaclamps are pressure die cast aluminium clamps capable of clamping any surface from 13mm flat to 50mm diameter poles. Rubber grip pads prevent damage to surfaces. Supplied with a wedge to grip flat surfaces. |
![]() |
The Doughty® Clamp combines strength and durability with a high degree of safety. Constructed from high tensile aluminium & finished in either polished aluminium or black powder paint, this unit provides a secure fixing for tubes with external diameters from 48 - 51mm. |
![]() |
Due to the increasing number of outdoor events using truss roof systems etc, Doughty® Engineering have developed a range of Doughty® Clamps with stainless steel fasteners to allow these clamps to be used outside for prolonged periods minimising any galvanic corrosion. These clamps have a SWL of 750 Kg. |
![]() |
The Slimline range of Doughty® Clamps carry all the same features of the standard Doughty® clamp range. This range is 30mm wide to allow the clamps to be used between truss webs etc. The standard clamp is slotted captivating an M12 nut or bolt head |
![]() |
Lightweight Doughty® Clamps are constructed from high tensile aluminium extrusion and have been developed for installations where load capacities of up to 500 Kg are required. Designed to fit tubes with diameters of 48 - 51mm, |
![]() |
Slimline Lightweight Doughty® Clamps carry the same quality features of the standard lightweight range. The width of the slimline range is 30mm allowing these clamps to be used between truss webs etc. |
![]() |
Super Lightweight Doughty® Clamps are constructed from high tensile aluminium extrusions designed to fit bars with diameters between 48 - 51mm and are slotted to hold captive an M10 nut or bolt head. |
![]() |
The Doughty Trigger® Clamp is constructed from high tensile aluminium extrusion making it not only lightweight, but extremely strong, with a safe working load and TÜV approval of 200 Kg. |
![]() |
The design of the Doughty Quick Trigger® Clamp gives a high degree of safety by allowing one person to hang heavy luminaires and fixtures. The sprung loaded jaws stay open and automatically close with the weight of an object being hung, |
![]() |
The Titan Quick Trigger® range of clamps has been designed to fit tubes with larger diameters between 48 & 80mm. This is the largest clamp in our range manufactured from high tensile aluminium. |
![]() |
The design of the Doughty Quick Trigger® Clamp gives a high degree of safety by allowing one person to hang heavy luminaires and fixtures. The sprung loaded jaws stay open and automatically close with the weight of an object being hung, |
![]() |
The standard range of Hook Clamps includes clamps to suit tube diameters from 20mm to 75mm. Manufactured from high quality steel these clamps are simple to use and are extremely strong. |
![]() |
The Mammoth Clamp Range has been designed to fit tubes with a diameter of 60 - 63mm. The mammoth half coupler has been TÜV tested and certified for a SWL of 500 Kg. |
![]() |
The Doughty® range of Suspension Clamps is a range of steel bracketry manufactured predominantly from flat steel bar. This range can be used to suspend truss and tubes as well as flying luminaires from the steel boom arms. |
![]() |
The Scissor Clamp is available in two sizes, Light Duty with a SWL of 100 Kg & Heavy Duty with a SWL of 350 Kg. This clamp has been designed to clamp beams and tubes and has a black powder paint finish. |
![]() |
The Doughty® Girder Clamp range is a comprehensive range of steel bracketry designed specifically to mount on to structural girders/beams often used to suspend loads. |
![]() |
All of the Doughty® Aluminium Clamp range is available in a wide range of anodised colours. Ideal for hire companies etc to identify their equipment from a distance or to blend in with a current colour scheme. For any anodised finish there is a minimum order qty of 100 pieces. |
![]() |
Pipeclamp fittings are malleable iron castings with a galvanised finish to BS729. Pipeclamp standard fittings are available to suit pipes with an external diameter from 21mm to 60mm. |

























































